4 Parts Replacement
4.2.10 Assembling of Scroller Receiver L and R
NOTE
Before assembling scroller receiver, remove the following part.
• Scroller receiver:
1. Attach the two position adjustment scroller roller shafts to the part A shown below of scroller receiver L
(or R). Make sure that the attachment direction is the same in the figure below.
1
2
2. Put the scroller receiver roller on the scroller roller shafts R.
1
NOTE
Scroller roller shaft R is easy-to-fall. Do not let the shaft fall by pressing or slanting it with a finger.
Rev.-01
CS9050, CS9150
"4.2.9 Removing Scroller Receiver (L, R)" p.4-16
2
4-18
VJ-1304 Maintenance Manual
No.
Part name
1
Scroller roller shaft R
A
2
Scroller receiver L
No.
Part name
1
Scroller receiver roller
2
Scroller roller shaft R