7
Rotate the release lever (C) in a counterclockwise direction with a springhook or needlenose pliers to decouple the
transfer module while pulling the transfer module toward the front.
8
Hold the release lever as you pull out the transfer module for the first four inches (100 mm), but a quick, firm pull
should overcome the latch at this point.
Lower left frame removal
Note: The right and left lower frames are in the same FRU.
1
Remove the media tray, and remove the screw (A) from the front.
2
Remove the waste toner bottle. See
"Waste toner bottle removal" on page
Repair information
292
271.
7527