Punch Carriage Shift Motor Assembly Removal - Lexmark W850n Manual

Punch carriage shift motor assembly removal

1.
Open the finisher front door assembly.
2.
Remove the rear upper cover. See
3.
Remove the punch carriage assembly. See
4.
Remove the two screws securing the cover (A) to the punch carriage assembly (B).
5.
Remove the cover (A).
6.
Remove the two screws securing the punch carriage shift motor assembly (C) to the punch unit
assembly (B).
7.
Remove the punch carriage shift motor assembly (C).
"Rear upper cover removal" on page
"Punch carriage assembly removal" on page
A
B
4024-110
4-24.
4-41.
C
Repair information
4-43