Sensor (Bridge Unit Top Cover Interlock) Removal - Lexmark X850e Service Manual

7500-XXX

Sensor (bridge unit top cover interlock) removal

1.
Remove the bridge unit assembly. See
2.
Place the bridge unit assembly upside down.
3.
Remove the screw securing the bracket (A) to the bridge unit assembly (B).
4.
Disconnect the cable from the sensor (bridge unit top cover interlock) (C).
5.
Release the hooks securing the sensor (bridge unit top cover interlock) (C) to the bracket (A).
6.
Remove the sensor (bridge unit top cover interlock) (C).
4-92
Options Service Manual
C
Connector
"Bridge unit assembly removal" on page
A
4-81.
B