Samsung Ubigate iBG2016 Configuration Manual page 730

CHAPTER 11. Management
CDR Attributes
The CDR in the Ubigate iBG2016 system transmits accounting request packet
according to RADIUS specification described in RFC2865, RFC2866.
The attribute described in Table 36.1 below is used and numerous Vendor
Specific Attributes are included.
Attribute type
30
31
40
44
26
Standard Attribute
Called Station ID
Attribute type: 30
Length: >= 3
This Attribute allows the NAS to send in the Access-Request packet the phone
number that the user called, using Dialed Number Identification(DNIS) or
similar technology. Note that this may be different from the phone number the
call comes in on. It is only used in Access-Request packets.
Calling Station ID
Attribute type: 31
Length >= 3
This Attribute allows the NAS to send in the Access-Request packet the phone
number that the call came from, using Automatic Number Identification(ANI)
or similar technology. It is only used in Access-Request packets.
Account Satus type
Attribute type: 40
Length: 6
This attribute indicates whether this Accounting-Request marks the beginning
of the user service(Start) or the end(Stop).
676
Table 11.17 Attribute List
Length
>=3
Called Station ID
>=3 Calling Station ID
6 Account Status Type
>=3 Account Session ID
>=7 Vendor Specific Attribute
Attribute Name
© SAMSUNG Electronics Co., Ltd.