Samsung Ubigate iBG2016 Configuration Manual page 331

13.
Configure firewall policies to allow transit traffic from remote LAN to
the local LAN.
Router/configure# firewall corp
Router/configure/firewall corp# policy 1000 in address
10.0.2.0 24
10.0.1.0 24
Router/configure/firewall corp/policy 1000 in# exit
Router/configure/firewall corp# exit
14.
Display firewall policies in the corp map.
Router# show firewall policy corp
Advanced: S-Self Traffic, F-Ftp-Filter, H-Http-Filter,
R-Rpc-Filter, N-Nat-Ip/Nat-Pool, L-Logging,
E-Policy Enabled, M-Smtp-Filter
Pri Dir Source Addr Destination Addr Sport Dport Proto
Action Advanced
--- --- ----------- ---------------- ----------------- -----
1000 in 10.0.2.0/24 10.0.1.0/24 any any any PERMIT E
1022 out any any any any any PERMIT SE
1023 in any any any any any PERMIT SE
1024 out any any any any any PERMIT E
15.
Display firewall policies in the corp map in detail.
Router# show firewall policy corp detail
Policy with Priority 1000 is enabled, Direction is inbound
Action permit, Traffic is transit
Logging is disable
Source Address is 10.0.2.0/24, Dest Address is 10.0.1.0/24
Source Port is any, Dest Port is any, any
Schedule is disabled, Ftp-Filter is disabled
Smtp-Filter is disabled, Http-Filter is disabled
Rpc-Filter is disabled, Nat is disabled
Max-Connections 1024, Connection-Rate is disabled
Policing is disabled, Bandwidth is disabled
Bytes In 0, Bytes Out 0
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG2016 Configuration Guide/Ed.00
281