Table of Contents
Advertisement
CHAPTER 10. QoS
Configuring srTCM
To enable policing using srTCM, CIR, CBS and EBS need to be configured.
CIR configuration will be mandatory and CBS and EBS parameters will be
optional. CBS will have a default value equal to 'CIR' Kbits, which means
that the default burst time will be 1 sec. EBS will have a default value of 0
Kbits.
An action corresponding to each color assigned to the packet can also be
configured. The types of actions that will be supported are 'permit',
'markdscp' and 'drop'. A DSCP value must be provided if the action type
selected is 'mark-dscp'. The configuration of actions will not be mandatory.
They will have the following default values: green packets - 'permit', yellow
packets - 'mark-dscp 0' and red packets - 'drop'. srTCM can be configured
and enabled for each 'leaf' traffic class on an interface.
190
© SAMSUNG Electronics Co., Ltd.
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
