Samsung Ubigate iBG2016 Configuration Manual page 607

Configuring Inclusion of the Sending Complete
Information Element
In some geographic locations, such as Hong Kong and Taiwan, ISDN switches
require that the Sending Complete information element be included in the
outgoing Setup message to indicate that the entire number is included.
This information element is generally not required in other locations.
To configure the interface to include the Sending Complete information
element in the outgoing call
Setup message, use the following command in interface configuration mode:
Step
1 configure terminal
2 interface bundle
bundle-name
3 link bri 0/0/0:1
4 isdn
5 switch-type
switch-type
6 incoming-voice
7 sendling-complete
8 activate
9 exit
10 voice-port 0/0/0
11 no shutdown
© SAMSUNG Electronics Co., Ltd.
Command
Configures to set up bundle.
Sets up bundle name.
Sets up the pertinent physical link.
Sets up ISDN
Sets up the pertinent switch-type with contents like the
following table.
Sets up for voice.
Includes the Sending Complete information element in
the outgoing call Setup message...
Activates ISDN.
-
Configure to set up voice port
Turns on the port.
Ubigate iBG2016 Configuration Guide/Ed.00
Purpose
553