Samsung Ubigate iBG2016 Configuration Manual page 49

SUBMARINE-DSX-TE3-MIB.mib
This MIB manages T3/E3 interfaces. Use this MIB to
Be notified when an alarm is generated(dsxT3E3AlarmOnTrap)
Be notified when an alarm is turned off(dsxT3E3AlarmOffTrap)
SUBMARINE-ENVIRON-MIB.mib
This MIB manages the chassis environment such as temperature, fan function.
Use this MIB to:
Be notified if the trap is set to true and if temperature reaches a critical level
(envTemperatureNotification).
Be notified if the trap is set to true and the fan state changes
(envFanNotification).
Be notified if the trap is set to true and the specified power supply shuts off
(envPowerSupply1DownNotification, envPowerSupply2DownNotification).
Be notified if the trap is set to true and the specified power supply turns on
(envPowerSupply1UpNotification, envPowerSupply2UpNotification).
SUBMARINE-FR-MIB.mib
This MIB manages Frame Relay and Multilink Frame Relay bundles and does
not contain any traps.
SUBMARINE-GHDLC-MIB.mib
This MIB manages generic HDLC encapsulated bundles and does not contain
any traps.
SUBMARINE-IP-MIB.mib
This MIB manages IP addressable interfaces and static routes and does not
contain any traps.
SUBMARINE-PPP-MIB.mib
This MIB manages PPP and MLPPP bundles and does not contain any traps.
SUBMARINE-SMI
This MIB manages internal MIB processes. It must be compiled before any
other MIBs are compiled. This does not contain any traps.
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG2016 Configuration Guide/Ed.00
15