Samsung Ubigate iBG2016 Configuration Manual page 520

CHAPTER 5. Analog Voice Port
Wink-Start Method
Wink-start is most used E & M Access method, and default signaling of voice
port. Wink-start method hooks off E-lead to enter 'seizure' action, and then
receives 'Wink' of M-lead on the counterpart office, and transmits address
information.
seizure
digits
digits
466
Originating
M-wire E-wire
Figure 5.5 wink method signaling sequence
Destination
M-wire E-wire
answer
answer
© SAMSUNG Electronics Co., Ltd.
Min 120 msec
Max 6 sec
Pulse=200 msec
Min 70 msec
Max 10 sec
Min 200 msec