Samsung Ubigate iBG2016 Configuration Manual page 644

CHAPTER 8. Routing and Digit Manipulation
2.
Priority configured by using the preference dial peer command
3.
Random selection.
By using global configuration command called 'dial-peer hunt', other
method to be capable of hunting dial peer can be selected. As another
selective standard, there is 'least recent use'. This selects the oldest dial-peer
in terms of selection matter.
With the basic dial peer hunting being possible, using dial-peer configuration
command called 'huntstop' enables not to try again hunting when call is failed
in the particular dial peer.
To select the method of hunting dial peer is possible by using 'dial-peer hunt'
global configuration command and the content is like the following table.
Command
sbm/configure#dial-
peer hunt hunt-order-
num
You can configure POTS and VoIP dial peers within a hunt group. If network
connectivity fails, you can reroute the calls back through the PBX to the PSTN.
This type of configuration is sometimes referred to as hairpinning or PSTN
fallback. VoIP dial-peer support PSTN fallback basically. To disable, use 'no
call-fallback port' command.
590
Set the standard of selecting dial peer within(optional) hunt
group. The selection is possible from 0 to 7 and 0 is default
value.
0 - longest match in phone number, explicit preference,
random selection.
1 - longest match in phone number, explicit preference,
least recent use.
2 - explicit preference, longest match in phone number,
random selection.
3 - explicit preference, longest match in phone number,
least recent use.
4 - Least recent use, longest match in phone number,
explicit preference.
5 - Least recent use, explicit preference, longest match in
phone number.
6 - Random selection.
7 - Least recent use.
Purpose
© SAMSUNG Electronics Co., Ltd.