Samsung Ubigate iBG2016 Configuration Manual page 112

CHAPTER 1. Layer-2 Switching
Step
6
7
8
9
10
11
12
13
14
15
The following shows the commad sequences for each bridge in the above
figure.
76
Command
Router/configure# span mst conf
Router/configure/spanning-tree/mst#
bridge 1 instance [instance number]
vlan [vlan number]
Router/configure/spanning-
tree/mst# exit
Router/configure# interface
[interface name]
Router/configure/interface/[interface
name]# switchport
Router/configure/interface/[interface
name]# bridge-group 1
Router/configure/interface/[interface
name]# bridge-group 1 instance
[instance number]
Router/configure/interface/[interface
name]# bridge-group 1 instance
[instance number] priority [priority
number]
Router/configure/interface/[interface
name]# end
Router# show span mst detail
Purpose
Enters MST configuration mode.
Associates bridge with VLAN.
Repeats as many as required.
instance number: ranges 1 to 15.
Exits MST configuration mode.
Enters interface configuration
mode.
Sets the interface as a switch
port.
Includes this interface in a bridge
group.
(Optional) Hitches this bridge to
an instance.
(Optional) Assigns priority.
priority number: ranges 0 to 240.
Return to the 'Router#' prompt.
Shows SMT details
© SAMSUNG Electronics Co., Ltd.
(Continued)