Samsung Ubigate iBG2016 Configuration Manual page 547

PBX E911 SWITCH
1. SEIZE --------------- (OFF-HOOK) ----------------------->
2. <----------- WINK START (l40 ms TO 290 ms) ------------->
3. KP 911 ST ---------------------------------------------->
4. <------------------------------------------------OFF-HOOK
5. KP I NXXXXXX ST (ANI) ---------------------------------->
6. <--------------- TALKING PATH CONNECTED ---------------->
Calling party goes on-hook
7. PBX DISCONNECTS ------------- (ON-HOOK) ---------------->
8. <---------------- 911 SWITCH DISCONNECTS -------- ON-HOOK
How to Configure CAMA
To configure CAMA function using analog FXO, follow the next procedures.
Configuration Steps
configure terminal
−
voice-port
−
dial-peer voice pots
−
exit
−
Detailed Steps
Step
1
2
3
4
© SAMSUNG Electronics Co., Ltd.
Command
configure terminal
Example)
# configure terminal
voice-port slot/subslot/port
shutdown
ani mapping 0-3 digits
for example:
ani mapping 0 415
0= 415, 1=510, 2=650, 3=916
05551234 = (415) 555-1234,
15551234 = (510) 555-1234,
and so on.
NPD range is from 0 to 3
Ubigate iBG2016 Configuration Guide/Ed.00
Purpose
Enters global configuration mode.
Enter voice port Configuration Mode
slot - Specifies the number of the router
slot where the voice module in installed
subslot - Specifies the number of subslot in the
slot
port - Indicates the voice port
Change status of voice port to shutdown
To preprogram the Numbering Plan
Area(NPA), or area code, into a single
Multi Frequency(MF) digit.
493