Samsung Ubigate iBG2016 Configuration Manual page 421

Configuring SIP Proxy
This section describes how to set the SIP proxy used in a Stand-Alone mode.
If you set a sip-server as a session target of dial-peer together with SIP proxy
setting, it is possible to send an outbound call to SIP proxy.
Restrictions for SIP Proxy Configuration
You can set SIP proxy only when Call Manager is not set already. You cannot
set SIP proxy in a Call Manager Inter-working mode or Survivable Telephony
mode. To set SIP proxy, first you must cancel the call-server setting using no
call-server ip-address command. This changes the operation mode to Stand-
Alone mode.
How to Configure SIP Proxy
You can set the SIP Proxy in the following way.
Configuration Steps
configure terminal
−
voip-gateway
−
sip-ua
−
sip-server
−
exit
−
exit
−
Detailed Steps
Step
1 configure terminal
Example)
# configure terminal
2 voip-gateway
Example)
/configure# voip-gateway
3 sip-ua
Example)
/configure/ voip-gateway# sip-ua
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG2016 Configuration Guide/Ed.00
Command Purpose
Enters global configuration
mode.
Enters voip-gateway
configuration mode.
Enters sip-ua configuration
mode.
367