Samsung Ubigate iBG2016 Configuration Manual page 690

CHAPTER 9. Extended VoIP Services
Configuring Services
To provide supplementary services for FXS phone, configure service by
service in FXS voice-port.
How to Configure Voice-Port for CLID
To enable the Caller Id function in FXS voice-port follow the below procedures.
Configuration Steps
configure terminal
−
voice-port
−
caller-id enable
−
exit
−
Detailed Steps
Step
1
2
3
4
636
Command
configure terminal
Example)
# configure terminal
voice-port slot/subslot/port
Example)
/configure# voice-port 0/1/2
[no] caller-id enable [type1 | type2]
Example)
/configure/voice-port(0/1/2)# caller-id enable
type1
Exit
Example)
/configure/voice-port(0/1/2)# exit
Purpose
Enters global configuration
mode.
Enters Voice-Port
configuration mode.
Enables or Disables caller-
id feature.
Exits the current mode
© SAMSUNG Electronics Co., Ltd.