Samsung Ubigate iBG2016 Configuration Manual page 645

Numbering Type Matching
Dial peer checks number type matching in addition to the condition such as
incoming called number, answer address, destination pattern, port and ip-
addresss. It determines dial-peer number type with 'numbering-type' dial-
peer configuration command.
The following number type can be used.
Abbreviated - Abbreviated representation of the complete number as
supported by this network.
International - Number called to reach a subscriber in another country.
National - Number called to reach a subscriber in the same country, but
outside the local network.
Network - Administrative or service number specific to the serving network.
Reserved - Reserved for extension.
Subscriber - Number called to reach a subscriber in the same local network.
Unknown - Type of number is unknown by the network.
For d etailed information about these numbering types, see ITU-T Recommendation
Q.931.
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG2016 Configuration Guide/Ed.00
591