Samsung Ubigate iBG2016 Configuration Manual page 693

How to Configure Dial-Peer for Call Waiting
To enable Call Waiting and Retrieve service, follow the procedures as below.
Configuration Steps
configure terminal
−
dial-peer voice pots
−
call-waiting
−
exit
−
Detailed Steps
Step
1
2
3
4
How to Configure Call Transfer
The Call Transfer service is available for all FXS subscribers by default.
There is no way to enable or disable this service.
© SAMSUNG Electronics Co., Ltd.
Command
configure terminal
Example)
# configure terminal
dial-peer voice pots tag
Example)
/configure# dial-peer voice pots 11
[no] call-waiting
Example)
/configure/ dial-peer/voice/pots 11# call-
waiting
Exit
Example)
/configure/ dial-peer/voice/pots 11# exit
Ubigate iBG2016 Configuration Guide/Ed.00
Purpose
Enters global configuration
mode.
Enters POTS Dial-peer
configuration mode.
Enables or Disables Call
waiting and retrieve service.
Exits the current mode
639