Configuring SIP Entity Monitoring Features
This section describes how to enable SIP Entity Monitoring Features. Ubigate
iBG2016 send OPTIONS message to monitor SIP remote entities. If no
response received, that entity is concidered as not operating status and new
call is not routed to that entity. After configured duation iBG send OPTIONS
message again. And if it gets response, status changed to nornal. To set the
duration and retry interval, use peer-mon duration command.
Restrictions for SIP Entity Monitoring Feature
This feature is available only when SIP remote entity can generate response,
which is positive or negative, to OPTIONS request. If SIP entity ignore
OPTIONS request and make no response, its status is always abnormal and it
never receive call from iBG.
How to Configure SIP Entity Monitoring Feature
You can enable or disable SIP entity monitoring feature in the following way.
Configuration Steps
configure terminal
−
voip-gateway
−
sip-ua
−
peer-mon duration
−
exit
−
exit
−
Detailed Steps
Step
1
2
3
© SAMSUNG Electronics Co., Ltd.
Command
configure terminal
Example)
# configure terminal
voip-gateway
Example)
/configure# voip-gateway
sip-ua
Example)
/configure/ voip-gateway# sip-ua
Ubigate iBG2016 Configuration Guide/Ed.00
Purpose
Enters global configuration mode.
Enters voip-gateway configuration
mode.
Enters sip-ua configuration mode.
397