Samsung Ubigate iBG2016 Configuration Manual page 639

clid remove [name]
Example)
sbm/configure../pots num# clid remove
clid restrict
Example)
sbm/configure.../voip num# clid restrict
clid override rdnis
Example)
sbm/configure.../pots num# clid override
rdnis
Configuring Dial Peer Matching Features
Destination Pattern
Destination pattern forms link with dialed string and the particular telephony
device. It is configured in dial peer by using destination-pattern command.
If dialed string matchs with destination pattern, POTS dial peer is routed to
voice port and VoIP dial peer is routed to session target. Against Outbound
VoIP dial peer, destination pattern determines dialed digit Ubigate iBG2016
should collect and transmit. The entire dial peer created in Ubigate iBG2016
should possess destination pattern. Destination pattern should possess full
telephone number or the partial number together with wildcard digit(ex:
period-'.'). Each '.' represents the single digit in spontaneous way.
For example, '345' means the spontaneous seven digit string starting with
'345'. In addition to period(.), there are various symbols applicable to
destination pattern. These symbols provide flexibility in configuring dial plan
and help to save trouble of creating various dial peers according to the range
of telephone number.
© SAMSUNG Electronics Co., Ltd.
Command
When there is no valid outbound dial-peer for POTS incoming call, the
call processed in the order of sip-server, gatekeeper after the
confirmation of configuration.
Ubigate iBG2016 Configuration Guide/Ed.00
Purpose
(optional) Remove the calling-party
number and name from the CLID.
(Optional) Restricts presentation of the
caller ID in the CLID.
(Optional; supported for POTS dial
peers only) Overrides the CLID with the
redirected dialed number identification
service(RDNIS) if available.
(Continued)
585