Samsung Ubigate iBG2016 Configuration Manual page 691

How to Configure Voice-Port for CLIDB
To block Caller Id in an originating call of FXS phone, follow the procedures
as below.
Configuration Steps
configure terminal
−
voice-port
−
caller-id block
−
exit
−
Detailed Steps
Step
1
2
3
4
How to Configure for Call Hold
The Call Hold and Retrieve service is available for all FXS subscribers by
default. There is no way to enable or disable.
© SAMSUNG Electronics Co., Ltd.
Command
configure terminal
Example)
# configure terminal
voice-port slot/subslot/port
Example)
/configure# voice-port 0/1/2
[no] caller-id block
Example)
/configure/voice-port(0/1/2)# caller-id block
Exit
Example)
/configure/voice-port(0/1/2)# exit
Ubigate iBG2016 Configuration Guide/Ed.00
Purpose
Enters global configuration
mode.
Enters Voice-Port
configuration mode.
Block or re-enable the caller
id of the calls made from
this port.
Exits the current mode
637