CHAPTER 3. SIP Gateway Management
5.
host ip-address
Instead of specify the source address of signaling and media stream via bind
command, you can directly specify the IP address in the following way.
Configuration Steps
−
−
−
−
Detailed Steps
Step
1
configure terminal
Example)
# configure terminal
2
voip-gateway
Example)
/configure# voip-gateway
3
host ip-address ip-address
Example)
/configure/voip-gateway# host ip-
address 90.90.90.90
4
exit
Example)
/configure/voip-gateway# exit
360
configure terminal
voip-gateway
host ip-address
exit
Command
Purpose
Enters global configuration mode.
Enters voip-gateway configuration
mode.
Sets source ip address for
signaling and media streams.
Exits the current mode
© SAMSUNG Electronics Co., Ltd.