How to Configure PLAR OPX
Configuration Steps
configure terminal
−
voice-port
−
connection plar-opx
−
exit
−
Detailed Steps
Step
1
2
3
4
PLAR and PLAR-OPX are able to configure in SCM interworking mode.
When PLAR and PLAR-OPX were configured on SCM interworking mode,
you don't need to set up the VoIP dial-peer.
© SAMSUNG Electronics Co., Ltd.
Command
configure terminal
Example)
# configure terminal
voice-port slot/subslot/port
Example)
/configure# voice-port 0/0/0
connection plar-opx digit-string
Example)
/configure/voice-port(slot/subslot/port)#
connection plar-opx 01034381234
exit
Example)
/configure/voice-port(slot/subslot/port)#
exit
Ubigate iBG2016 Configuration Guide/Ed.00
Purpose
Enters global configuration mode.
Enters voice-port configuration
mode.
Enters connection mode for voice
port
Exits the current mode
611