Samsung Ubigate iBG2016 Configuration Manual page 664

CHAPTER 8. Routing and Digit Manipulation
PLAR-OPX
PLAR-OPX(Private-line Automatic Ringdown Off-Premises eXtension)
enables the user of remote FXS port to see central PBX in the physically
expanded way.
By using this option, local voice port provides the local response before the
remote voice port receives answer.
The PLAR-OPX connection makes possible call before user makes dialing.
The Ubigate iBG2016 uses the digits that follow the command internally to
send to a dial peer
iBG2016 A
FXS
610
SIP Direct Call Setup
Dial-peer voice voip 1
destination-pattern yyy
dtmf-relay sip-notify
codec g729a
session target ip-address
ipv4: iBG2016 2
Dial-peer voice pots 2
destination-pattern xxx
port slot/subslot/port
Voice-port slot/subslot/port
timing-hookflash-out 500
connection PLAR yyy
Figure 8.11 Example of PLAR-OPX configuration
Voice port PLAR
Internet
Backbone
Dial-peer voice voip 1
destination-pattern xxx
dtmf-relay sip-notify
codec g729a
session target ip-address
ipv4: iBG2016 1
Dial-peer voice pots 1
destination-pattern yyy
port slot/subslot/port
Voice-port slot/subslot/port
timing-hookflash-out 1000
connection PLAR-OPX xxx
iBG2016 B
FXO
PABX
© SAMSUNG Electronics Co., Ltd.