Samsung Ubigate iBG2016 Configuration Manual page 39

Syntax Help
The CLI can complete the spelling of command or parameter keywords.
Begin typing the command or parameter then press TAB. At the CLI
command prompt type sh:
Router# sh
Press TAB. The CLI shows:
Router# show
If the command or parameter partial spelling is ambiguous, the CLI displays
the choices that match the abbreviation. Type show i. Press TAB. The CLI
shows:
Router# show interface
The interface displays 'show interface' and Type TAB once again then it
displays another parameter 'show ip.' Any available paramters can be fetched
by typing TAB.
Type ? and the CLI shows the list of parameters for the show interface
command.
Router# show interface ?
avc
Bundle
Bundles
Ethernet
Ethernets
l2tp-server
loopback
switchport
tunnel
tunnels
virtual-access display virtual access interface(s)
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG2016 Configuration Guide/Ed.00
display information about an
DTE-to-DTE MFR avc
display information about a bundle
display all the names of bundles
Configured in the system
display an ethernet interface
display all ethernet interfaces
display l2tp-server interface(s)
display loopback interface(s)
Display the modes of the Layer2 interfaces
display a tunnel interface
display all tunnel interfaces
5