Show Ip Source Binding - Cisco Catalyst 3750 Metro Command Reference Manual

show ip source binding

show ip source binding
Use the show ip source binding user EXEC command to display the IP source bindings on the switch.
Syntax Description ip-address
mac-address
dhcp-snooping
static
interface interface-id
vlan vlan-id
Command Modes User EXEC
Command History Release
12.2(25)EY
Usage Guidelines The show ip source binding command output shows the dynamically and statically configured bindings
in the DHCP snooping binding database. Use the show ip dhcp snooping binding privileged EXEC
command to display only the dynamically configured bindings.
Examples This is an example of output from the show ip source binding command:
Switch> show ip source binding
MacAddress
--------------
00:00:00:0A:00:0B
00:00:00:0A:00:0A
Related Commands Command
ip dhcp snooping binding
ip source binding
Catalyst 3750 Metro Switch Command Reference
2-510
show ip source binding [ip-address] [mac-address] [dhcp-snooping | static] [interface
interface-id] [vlan vlan-id]
(Optional) Display IP source bindings for a specific IP address.
(Optional) Display IP source bindings for a specific MAC address.
(Optional) Display IP source bindings that were learned by DHCP
snooping.
(Optional) Display static IP source bindings.
(Optional) Display IP source bindings on a specific interface.
(Optional) Display IP source bindings on a specific VLAN.
Modification
This command was introduced.
IpAddress
---------------
11.0.0.1
11.0.0.2
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
Lease(sec) Type
---------- -------------
infinite static
10000 dhcp-snooping
Description
Configures the DHCP snooping binding database.
Configures static IP source bindings on the switch.
VLAN Interface
---- --------------------
10 GigabitEthernet1/0/1
10 GigabitEthernet1/0/1
OL-9645-10