Working With Menus And Screens - Avaya S6200 Administration And Maintenance

Using the System Management Interface

Working with Menus and Screens

Table 5 lists and describes keyboard procedures for navigating through menus and screens,
selecting items from menus and screens, changing configuration settings in screens, and
saving or canceling changes made to settings. Special keystroke operations not covered in this
section are described where required throughout this guide.
Table 5: Menu and Screen Keyboard Procedures
Operation
Selecting menu options
and screen fields.
Invoking a menu option
or executing an action
on a selection.
Entering or changing a
parameter setting.
Saving or canceling
changes made to
parameter settings.
Scroll through multiple
screens.
Exit a menu or screen
32 Administration and Maintenance of the S6200/S6800 Servers
Procedure
Options:
Use the keys to navigate to the field or option.
ARROW
l
Press the first letter of the field or option. If there is
l
more than one item with the same first letter, press
the letter again to move to the next item.
Select the item, and then press
Select the parameter, and then use the appropriate option:
If required to enter a value:
l
Type the value, and then press
If required to choose a setting:
l
Use the
SPACE BAR
press .
ENTER
Note:
If you enter invalid input, the system does
Note:
not allow you to complete the operation.
Press . Then either save or cancel your changes:
ESC
Press to save your changes.
Y
l
Press to cancel your changes and retain previous
N
l
settings.
Both close the screen and return you to the previous
screen.
Use the /
PAGE UP PAGE DOWN
Press the key. (You are prompted to save or cancel any
ESC
changes you have made to an editable screen.)
.
ENTER
.
ENTER
to cycle through settings, and then
keys.