Table of Contents
Advertisement
2000–2999: Process Interface Messages
Table 54: Process Interface Messages
Message Code
2000
2001
2002
2003
2004
2005
2006
2100
2101
2102
2104
Message
MakeNull/Add/Peek/Delete link list
failure
Cannot start/stop timer
Reply_dial_done error
Report_DSP_fail error
Report_digits error
Cmd_dial_done error
Cmd_tone_done error
Error message has unknown
source key 0x%d
Received unknown command
0x%d
Undefined message type 0x%X
received from process %d
Unknown delayed command
(0x%d) for channel %d
Meaning
The specified software operation
with respect to link lists failed.
An attempt to start or stop a timer
provided by the timer process or to
create a queue for such timers
failed.
A failed attempt to inform the call
handler that a previous request to
dial a number was completed.
A process was unable to inform
the call handler that a DSP failed.
The event process was unable to
inform either the call handler that
DNIS digits have been received or
the command process that DTMF
digits have been received.
A failed attempt to report to the
command process that dialing is
completed.
A failed attempt to report to the
command process that a tone is
completed.
The log process has been
requested to enter a log message
from an unknown process with the
specified source key.
A process received a message to
perform an unknown or
unsupported operation with the
specified command number.
Indicates a message has been
received by a process that could
not be processed.
The command process does not
recognize the specified command
that it saved for delayed
processing on the specified logical
channel number.
1 of 2
Issue 1
System Messages
August 2007
281
Advertisement
Table of Contents
