Copying The Files To The System - Avaya S6200 Administration And Maintenance

Managing Files
An example pinlist.txt file may look like this one:
ACBRIDGE List|99999999901|||
ACBRIDGE List|99999999902|||

Copying the files to the system

This section describes how to copy the files from your PC or workstation to the system.
To copy PIN code files to the system:
1. Navigate to the directory on your system where the PIN code files are stored.
cd /usr/dcb/dbase/bridgedb/batchdata/
2. Start an SCP session with the destination system for the PIN code files.
scp <system_name>
3. Enter the log information at the user prompt.
login: brdgdbo
Password:*******
4. Change the directory to the location of the data files:
cd /usr/dcb/dbase/bridgedb/batchdata/
5. Enter
binary
scp> binary
6. Run the
put pinlist.txt pinlist.txt
or workstation to the system /usr/dcb/dbase/bridgedb/batchdata/ directory.
7. Run the
put pins.txt pins.txt
the system /usr/dcb/dbase/bridgedb/batchdata/ directory.
8. Type the command:
ls-l
to list files in the /usr/dcb/dbase/bridgedb/batchdata/ directory and verify that the files were
copied.
9. Exit the FTP session.
scp> quit
208 Administration and Maintenance of the S6200/S6800 Servers
at the prompt to indicate that you want to copy the files in binary format.
ftp>
command to move the pinlist.txt file from your PC
to move the pins.txt file from your PC or workstation to