Specifying Flex-Dapi Channels - Avaya S6200 Administration And Maintenance

System Maintenance Options

Specifying Flex-DAPI Channels

To specify the number of FDAPI channels to use for auxiliary functions:
1. Select System Maintenance Main > FDAPI Configuration.
The system displays the Flex-DAPI configuration screen which corresponds to the transport
protocols installed on the system.
.
Flex-DAPI Configuration
2. Enter the number of operator, record/playback, link, and music channels you want to
specify. Refer to
3. Save (or cancel) your changes.
Table 23: Flex-DAPI Fields and Channel Configurations
Field / Auxiliary Function
Operators / Operator voice channels — For operator audio paths, the
number of operator audio paths lines.
See Operator Audio Paths
operator audio paths over non-FDAPI channels.
Rec/Play / Record/playback channels — The number of lines
assigned to conference recording and playback over analog channels.
Digital Record lines do not use an FDAPI channel. Off-bridge
Recording devices also do not use an FDAPI channel. They use
revenue channels.
Note: The S6200/S6800 does not support analog record/playback
channels.
124 Administration and Maintenance of the S6200/S6800 Servers
+-Flex-DAPI Configuration-+
¦
¦
¦ Operators:
¦ Rec/Play:
¦
¦
¦
¦ Analog Music: OFF
+------ ESC to Exit ------+
Table 23 for a description of fields.
on page 73 for information on configuring
¦
T1/E1 ¦
20 ¦
5 ¦
Link: 10 ¦
Music: 1 ¦
¦
¦
Channel
Configuration
Default Range
1 0 — 70
1 0 — 48
1 of 2