System Re-Initialization - Avaya S6200 Administration And Maintenance

System Maintenance Options

System Re-Initialization

Re-initialization resets trunk parameters. It should only be performed by authorized personnel
while the system is out of service (not supporting audioconference services).
!
CAUTION:
Re-initialize terminates all conferences. Do not re-initialize an active system
CAUTION:
unless absolutely necessary.
!
CAUTION:
Ensure that the 3.5 disk drive is empty before you re-initialize the system so the
CAUTION:
system does not attempt to boot from the floppy in the disk drive.
To re-initialize the system:
1. Select System Maintenance Main > Re-Initialization.
The system
System Re-Initialization
2. Enter
YES
re-initialization.)
During the re-initialization, the system displays this message:
System Shutdown in progress.
Please stand by...
The re-initialization process lasts approximately 3 minutes.
128 Administration and Maintenance of the S6200/S6800 Servers
displaysSystem Re-Initialization.
+---System Re-Initialization----+
¦
¦ ARE YOU SURE? (yes/NO):
¦
+-------------------------------+
to begin the re-initialization. (Enter
¦
¦
¦
or press any other key to abort the
NO