Remote Monitoring (Rmon) Overview; Rmon Specifications - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Remote Monitoring (RMON) Overview

Remote Monitoring (RMON) Overview
The following sections detail the specifications, defaults, and quick set up steps for the RMON feature.
Detailed procedures are found in

RMON Specifications

RFCs Supported
RMON Functionality Supported
RMON Functionality Not Supported
Flavor (Probe Type)
Status
History Control Interval (seconds)
History Sample Index Range
Alarm Interval (seconds)
Alarm Startup Alarm
Alarm Sample Type
RMON Traps Supported
page 35-10
"Remote Monitoring (RMON)" on page
2819 - Remote Network Monitoring
Management Information Base
Basic RMON 4 group implementation
–Ethernet Statistics group
–History (Control and Statistics) group
–Alarms group
–Events group
RMON 10 group*
RMON2*
–Host group
–HostTopN group
–Matrix group
–Filter group
–Packet Capture group
(*An external RMON probe that includes
RMON 10 group and RMON2 may be used
where full RMON probe functionality is
required.)
Ethernet/History/Alarm
Active/Creating/Inactive
1 to 3600
1 to 65535
1 to 2147483647
Rising Alarm/Falling Alarm/
RisingOrFalling Alarm
Delta Value/Absolute
RisingAlarm/FallingAlarm
These traps are generated whenever an Alarm
entry crosses either its Rising Threshold or its
Falling Threshold and generates an event con-
figured for sending SNMP traps.
OmniSwitch 6800/6850/9000 Network Configuration Guide
Diagnosing Switch Problems
35-34.
March 2008