Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual page 130

Configuring Service-Based VLAN Stacking
Commands
ethernet-service mode
ethernet-service
ethernet-service service-name
ethernet-service svlan nni
ethernet-service nni
ethernet-service sap
ethernet-service sap uni
ethernet-service sap cvlan
ethernet-service sap-profile
ethernet-service sap sap-profile
ethernet-service uni-profile
ethernet-service uni uni-profile
page 6-16
Used for ...
Changing the active VLAN Stacking mode for the
switch.
Creating SVLANs to tunnel customer or manage-
ment traffic or an IP Multicast VLAN for distrib-
uting multicast traffic.
Creating a VLAN Stacking service and associat-
ing the service with an SVLAN or IP multicast
VLAN.
Configuring a switch port as a VLAN Stacking
NNI port and associating the NNI port with an
SVLAN.
Configuring a vendor TPID and legacy Spanning
Tree or GVRP support for an NNI port.
Creating a VLAN Stacking SAP and associates
the SAP with a VLAN Stacking service name.
Configuring a switch port as a VLAN Stacking
UNI port and associating the UNI port with a
VLAN Stacking SAP.
Specifying the type of customer traffic that is
accepted on SAP UNI ports.
Configures traffic engineering attributes for cus-
tomer traffic that is accepted on SAP UNI ports.
Associates a VLAN Stacking SAP with a profile.
Configures how protocol control frames are pro-
cessed on VLAN Stacking UNI ports.
Associates a VLAN Stacking UNI port with a
profile.
OmniSwitch 6800/6850/9000 Network Configuration Guide
Configuring VLAN Stacking
March 2008