Importing Acl Text Files - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Using ACL Manager

Importing ACL Text Files

In addition to using ACLMAN interactive shell commands or editing the aclman.cfg file to configure
common industry ACLs, it is possible to use a text file to update the running configuration. This method
involves entering common industry ACL statements into a text document using a text editor. The text file
must reside in any directory in the switch flash file system.
To apply the contents of an ACL text file to the ACLMAN running configuration, use the import
command in the Privileged Exec Mode of the ACLMAN interactive shell. For example, the following
command imports the contents of the std_acl20 text file:
Aclman#import std_acl20
By default ACLMAN looks in the /flash directory on the switch for the filename specified with the
import command. If the file is in any other directory, specify the path where the text file is located along
with the filename. For example, the following command imports the ext_acl102 file located in the work-
ing directory on the switch:
Aclman#import working/std_acl102
Note that any errors encountered when importing the contents of a text file into the ACLMAN configura-
tion are logged to an aclman.cfg.1.err file on the switch. If this file already exists, then the error filename
number is incremented by a value of one (e.g., aclman.cfg.2.err, aclman.cfg.3.err) for each new error log
file that is created.
Importing ACL statements from a text file updates the ACLMAN running configuration. Use the write
memory command in the Privileged Exec Mode to save the updated running configuration to the
aclman.cfg file. This will add the imported statements to the ACLMAN startup configuration.
Note. Issuing a write memory command is required to preserve the ACLMAN running configuration
across switch reboots.
OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
Configuring ACLs
page 28-21