Table of Contents
Advertisement
OmniSwitch 6450 Feature Overview
Hardware Monitoring
Automatic Monitoring
Automatic monitoring refers to the switch's built-in sensors that automatically monitor operations. If an
error is detected (e.g., over-threshold temperature), the switch immediately sends a trap to the user. The
trap is displayed on the console in the form of a text error message.
LEDs
LEDs, which provide visual status information, are provided on the chassis front panel. LEDs are used to
indicate conditions such as hardware and software status, temperature errors, link integrity, data flow, etc.
For detailed LED descriptions, refer to
Components."
User-Driven Monitoring
User-driven hardware monitoring refers to CLI commands that are entered by the user in order to access
the current status of hardware components. The user enters "show" commands that output information to
the console. Monitoring information for chassis components, such as the optional back up power supply,
chassis temperature sensor, and chassis fans is provided in
Hardware Components."
OmniSwitch 6250/6450 CLI Reference Guide.
page 1-6
Chapter 2, "OmniSwitch 6450 Chassis and Hardware
The show commands for all the features are described in detail in the
Chapter 2, "OmniSwitch 6450 Chassis and
OmniSwitch 6450 Hardware Users Guide
OmniSwitch 6450 Switches
January 2015
Advertisement
Table of Contents
