Vrrp Specifications; Vrrp Defaults - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Configuring VRRP

VRRP Specifications

RFCs Supported
Compatible with HSRP?
Maximum number of VRRPv2 and VRRPv3
virtual routers combined
Maximum number of IP addresses

VRRP Defaults

The following table lists the defaults for VRRP configuration through the
command keywords:
Description
Virtual router enabled or dis-
abled
Priority
Preempt mode
Advertising interval
The following table lists the defaults for VRRP configuration using the VRRP collective management
features and the relevant command:
Default advertising interval for
all the virtual routers on the
switch.
Default priority value for all the
virtual routers on the switch.
Default preempt mode for all the
virtual routers on the switch.
Parameter value that is to be set
and/or override with the new
default value in all the virtual
routers on the switch.
Default advertising interval for
all the virtual routers in the
group.
Default priority value for all the
virtual routers in the group.
Default preempt mode for all the
virtual routers in the group.
OmniSwitch 6800/6850/9000 Network Configuration Guide
RFC 3768–Virtual Router Redundancy Protocol
RFC 2787–Definitions of Managed Objects for the Virtual
Router Redundancy Protocol
No
255 per switch
255 per virtual router
Keyword
enable | disable | on | off
priority
preempt | no preempt
advertising interval
vrrp interval
vrrp priority
vrrp preempt
vrrp set
vrrp group
vrrp group
vrrp group
vrrp command and the relevant
Default
Virtual routers are disabled (off)
100
Preempt mode is enabled
1 second
1 second
100
preempt
all
1
100
preempt
March 2008
VRRP Specifications
page 23-3