Setting The Av-Client As Primary Network Login; Configuring The Av-Client Utility - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Hide thumbs Also See for OmniSwitch 6800 Series:

Table of Contents

Configuring Authenticated VLANs

Setting the AV-Client as Primary Network Login

Windows 95 and Windows 98

If your operating system is Windows 95 or Windows 98, you must configure the AV-Client as the primary

network login. This is done via the Windows Control Panel. From your Windows desktop, select Start >

Settings > Control Panel. Double-click on the Network icon on the Control Panel window. From the

Configuration Tab, proceed as follows:

Click the Add button.

Select the "Client" from the list and click the Add button. The "Select Network Client Window"

You can click the Have Disk button, enter the correct path for your disk drive in the space provided

and click OK. You can also browse to the directory where the AV-Client is installed and click OK. Select

"Alcatel AVLAN Login Provider".

Select Alcatel AVLAN Login Provider as the Primary Network Login on the Configuration tab.

Complete the setup as prompted by Windows.

Note. Make sure to have your Windows 95 or 98 media available during this procedure.

The AV-Client includes a utility for configuring client options. To run the utility, install the AV-Client

and reboot the PC workstation. From your Windows desktop, select Start > Settings > Control Panel.

Double-click on the Authenticated VLANs Client icon in the Control Panel window. You can also access

the utility by pointing your mouse to the AV-Client icon on the Windows system tray and executing a

right click to select Settings. The following screen displays:

OmniSwitch 6800/6850/9000 Network Configuration Guide

Setting Up Authentication Clients