Adding The Microsoft Loopback Adapter Driver; Adding The Loopback Adapter Driver To A Windows Nt Server - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Configuring Server Load Balancing

Adding the Microsoft Loopback Adapter Driver

This section describes how to add Microsoft's loopback adapter to Windows NT servers (see
Loopback Adapter Driver to a Windows NT Server" on page
"Adding the Loopback Adapter Driver to a Windows 2000 Server" on page

Adding the Loopback Adapter Driver to a Windows NT Server

Follow the steps below to add the Microsoft loopback adapter driver to a Windows NT server.
1
Open the Control Panel window by clicking the Start button and then selecting Settings.
2
Double-click the Network icon in the Control Panel window.
Double-click
the "Network"
icon.
3
Click the Adapters tab in the Network window.
Click the "Add..."
button when ready.
4
Click the Add... button.
OmniSwitch 6800/6850/9000 Network Configuration Guide
Configuring the Server Farm
34-15) and Windows 2000 servers (see
34-17).
Click the
"Adapters"
tab.
March 2008
"Adding the
page 34-15