Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual page 840

Monitoring Switch Health
The following sections include a discussion of CLI commands that can be used to configure resource
parameters and monitor or reset statistics for switch resources. These commands include:
•
health threshold—Configures threshold limits for input traffic (RX), output/input traffic (TX/RX),
memory usage, CPU usage, and chassis temperature. See
•
show health threshold—Displays current health threshold settings. See
•
health interval—Configures sampling interval between health statistics checks. See
more information.
•
show health interval—Displays current health sampling interval, measured in seconds. See
35-45 for details.
•
show health —Displays health statistics for the switch, as percentages of total resource capacity. See
page 35-46 for more information.
•
health statistics
page 35-42
reset—Resets health statistics for the switch. See
OmniSwitch 6800/6850/9000 Network Configuration Guide
Diagnosing Switch Problems
page 35-43 for more information.
page 35-44
page 35-47 for details.
for details.
page 35-45 for
page
March 2008