Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual page 471

Hide thumbs Also See for OmniSwitch 6800 Series:

Table of Contents

Configuring VRRP

Note. You can specify a parameter such as interval, priority, preempt or all in the

command to set and/or override the existing value with the new default values. By default the option all is

applied. The all option resets and/or overrides the existing advertising interval value, priority value and

preempt mode with the modified default values.

The next command enables all the virtual routers in the group except the virtual routers that are disabled

individually. To enable all the virtual routers in the group including those which are disabled individually,

you can use the same command with the enable all option as follows:

-> vrrp group 25 enable all

Note. Even though a virtual router may be assigned to a group, its parameter values and administrative

status can still be modified individually.

OmniSwitch 6800/6850/9000 Network Configuration Guide

VRRP Configuration Overview

vrrp group set