Displaying The Qos Log; Clearing The Qos Log - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Configuring QoS
Use the swlog output
that this is in addition to sending log events to a file in the flash file system of the switch. See the "Using
Switch Logging" chapter in the OmniSwitch 6800/6850/9000 Network Configuration Guide for more
information.

Displaying the QoS Log

To view the QoS log, use the
**QOS Log**
Insert rule 0
Rule index at 0
Insert rule 1
Rule index at 1
Insert rule 2
Rule index at 2
Enable rule r1 (1) 1,1
Enable rule r2 (0) 1,1
Enable rule yuba1 (2) 1,1
Verify rule r1(1)
Enable rule r1 (1) 1,1
Really enable r1
Update condition c1 for rule 1 (1)
Verify rule r2(1)
Enable rule r2 (0) 1,1
Really enable r2
Update condition c2 for rule 0 (1)
Verify rule yuba1(1)
Enable rule yuba1 (2) 1,1
Really enable yuba1
Update condition yubamac for rule 2 (1)
QoS Manager started TUE MAR 10 13:46:50 2002
Match rule 2 to 1
Match rule 2 to 2
Match rule 2 to 3
The log display may be modified through the qos log lines, qos log level, and debug qos commands. The
log display may also be output to the console through the qos log console command or sent to the policy
software in the switch (which manages policies downloaded from an LDAP server) through the qos
forward log command.

Clearing the QoS Log

The QoS log can get large if invalid rules are configured on the switch, or if a lot of QoS events have
taken place. Clearing the log makes the file easier to manage.
To clear the QoS log, use the
-> qos clear log
All the current lines in the QoS log are deleted.
OmniSwitch 6800/6850/9000 Network Configuration Guide
command to configure switch logging to output logging events to the console. Note
show qos log command. The display is similar to the following:
qos clear log command. For example:
Configuring Global QoS Parameters
March 2008 page 30-21