Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual page 422

Quick Steps for Configuring RDP
To verify the configuration for a specific RDP interface, specify the interface name when using the show
ip router-discovery interface command. The display is similar to the one shown below:
-> show ip router-discovery interface Marketing
Name
IP Address
IP Mask
IP Interface status
RDP Interface status
VRRP Interface status
Advertisement address
Max Advertisement interval
Min Advertisement interval
Advertisement lifetime
Preference Level
#Packets sent
#Packets received
For more information about this command, refer to the "RDP Commands" chapter in the OmniSwitch CLI
Reference Guide.
page 21-4
= Marketing,
= 11.255.4.1,
= 255.0.0.0,
= Enabled,
= Enabled,
= Disabled,
= 224.0.0.1,
= 600 secs,
= 450 secs,
= 1800 secs,
= 0x0,
= 3,
= 0
OmniSwitch 6800/6850/9000 Network Configuration Guide
Configuring RDP
March 2008