Action Combinations - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Action Combinations

Action Combinations
The CLI prevents you from configuring invalid action combinations that are never allowed; however, it
does allow you to create combinations that are supported in some scenarios. For example, an action speci-
fying maximum bandwidth may be combined with an action specifying priority.
The following actions are supported and may be combined with other actions:
•
ACL (disposition drop)
•
Priority
•
802.1p ToS/DCSP Stamping and Mapping
•
Maximum Bandwidth
•
Port Redirection (not supported on the OmniSwitch 6800)
•
Link Aggregate Redirection (not supported on the OmniSwitch 6800 and 6850)
•
Port Disable (not supported on the OmniSwitch 6800)
•
Permanent Gateway IP (not supported on the OmniSwitch 6800 and 6850)
•
Mirror (not supported on the OmniSwitch 6800)
Use the following policy action combinations table as a guide when creating policy rules. For more infor-
mation about combining policy conditions or policy conditions and actions, see
tions" on page 30-6
Policy Action Combinations Table
Drop
N/A
Drop
No
Priority
No
Stamp/Map
No
Max BW
No
Redirect
Port
No
Redirect
Linkagg
No
Port Disable
No
Permanent
Gateway IP
Yes
Mirroring
Note that the minimum bandwidth action is not included in the list of actions because it is no longer
supported on the OmniSwitch 6800 and is not supported on the OmniSwitch 6850 or 9000.
page 30-8
and "Condition and Action Combinations" on page
Stamp/
Priority Map Max BW
No No No
N/A Yes Yes
Yes N/A Yes
Yes Yes N/A
Yes Yes Yes
Yes Yes Yes
No No No
Yes Yes Yes
Yes Yes Yes
OmniSwitch 6800/6850/9000 Network Configuration Guide
30-9.
Redirect Redirect Port
Port Linkagg Disable
No No No
Yes Yes No
Yes Yes No
Yes Yes No
N/A No No
No N/A No
No No N/A
Yes Yes No
Yes Yes No
Configuring QoS
"Condition Combina-
Permanent
Gateway IP Mirror
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No No
N/A Yes
Yes N/A
March 2008