Using The Aclman Shell - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Using ACL Manager

Using the ACLMAN Shell

The aclman command activates the ACLMAN interactive shell. When the shell is active, the following
command prompt appears:
Aclman#
Once the shell is active, then only supported ACLMAN syntax is allowed. There is no predetermined or
configurable timeout value that triggers an exit from the ACLMAN shell. The exit command is used to
return to the Alcatel-Lucent CLI. However, if the configured timeout value for a CLI or telnet session is
reached, the entire session including the ACLMAN shell is dropped. The Alcatel-Lucent CLI command,
kill, is available to terminate a session that is frozen.
The ACLMAN interactive shell supports partial command recognition. To use this optional feature, enter
enough of the command keyword to make it unique and then press the Tab key. ACLMAN fills out the
rest of the keyword. For example:
Aclman#confi
Aclman#configure ter
Aclman#configure terminal
Aclman(config)#
Entering a question mark (?) after a partial command provides a list of potential commands that match the
partial entry. For example:
Aclman#(config)i?
interface ip
Aclman#(config)i
Help is an available menu item in each of the shell command modes. In addition, help is also available by
entering a question mark (?) at the command prompt or after entering a command parameter. For example:
Aclman(config)#?
access-list
end
exit
help
interface
ip
no
time-range
Aclman(config)#access-list ?
<1-99>
<100-199>
<1300-1999>
<2000-2699>
Aclman(config)#access-list
OmniSwitch 6800/6850/9000 Network Configuration Guide
Add an access list entry
Return to privileged exec mode
Exit from configure mode
Description of the interactive help system
Select an interface to configure
Global IP configuration subcommands
Negate a command or set its defaults
Define time range entries
IP standard access list
IP extended access list
IP standard access list (expanded range)
IP extended access list (expanded range)
March 2008
Using the ACLMAN Shell
page 28-7