Acl Specifications - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Hide thumbs Also See for OmniSwitch 6800 Series:

Table of Contents

ACL Specifications

These specifications are the same as those for QoS in general:

Note. The QoS/ACL functionality described in this chapter is supported on the OmniSwitch 6800, 6850,

and 9000 switches unless otherwise stated in the following Specifications table or specifically noted within

any other section of this chapter.

Maximum number of configurable policy rules

Maximum number of policy conditions

Maximum number of policy actions

Maximum number of policy services

Maximum number of groups (network, MAC, ser-

Maximum number of group entries

Maximum number of rules per slot

Maximum number of bandwidth shaping rules per

Maximum number of policy rules per Ethernet port 101 (OmniSwitch 6800 only)

Maximum number of policy rules per 10 Gigabit

Maximum number of priority queues per port

CLI Command Prefix Recognition

512 per group

1664 (OmniSwitch 6850 and 9000 only)

832 (OmniSwitch 6850 and 9000 only)

997 (OmniSwitch 6800 only)

8 (Note that two of the eight queues on

OmniSwitch 6800 QoS ports are reserved for

internal use only, so they are not available.)

Some QoS commands support prefix recognition.

See the "Using the CLI" chapter in the

OmniSwitch 6800/6850/9000 Switch Manage-

ment Guide for more information.

OmniSwitch 6800/6850/9000 Network Configuration Guide

Configuring ACLs