Assigning An Ipv4/Ipv6 Address To An Ipmvlan; Deleting An Ipv4/Ipv6 Address From An Ipmvlan; Assigning And Deleting C-Tag; Assigning C-Tag To An Ipmvlan - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Hide thumbs Also See for OmniSwitch 6800 Series:
Table of Contents

Advertisement

Configuring IPMVLAN

Assigning an IPv4/IPv6 Address to an IPMVLAN

To assign an IPv4 or IPv6 address to an existing IPMVLAN, use the
shown below:
-> vlan ipmvlan 1003 address 225.0.0.1
-> vlan ipmvlan 1033 address ff08::3

Deleting an IPv4/IPv6 Address from an IPMVLAN

To delete an IPv4 or IPv6 address from an existing IP Multicast VLAN, use the no form of the
vlan ipmvlan address
keyword address, and either the IPv4 or IPv6 address, as shown below:
-> no vlan ipmvlan 1003 address 225.0.0.1
-> no vlan ipmvlan 1033 address ff08::3

Assigning and Deleting C-Tag

The following subsections describe how to assign and delete c-tag in an IPMVLAN with the
vlan ipmvlan ctag
command.

Assigning C-Tag to an IPMVLAN

To assign c-tag to an IP Multicast VLAN, use the
-> vlan ipmvlan 1003 ctag 10

Deleting C-Tag from an IPMVLAN

To delete c-tag from an IPMVLAN, use the no form of the
no vlan ipmvlan followed by the IPMVLAN ID, the keyword ctag, and the customer VLAN ID number,
as shown below:
-> no vlan ipmvlan 1003 ctag 10

Creating and Deleting a Sender Port

The following subsections describe how to create and delete a sender port in an IPMVLAN with the
vlan ipmvlan sender-port

Creating a Sender Port in an IPMVLAN

To create a sender port in an IPMVLAN configured in the Enterprise mode, use the
vlan ipmvlan sender-port
-> vlan ipmvlan 1003 sender-port port 1/50
To create multiple sender ports in an IPMVLAN, specify a range of ports. For example:
-> vlan ipmvlan 1003 sender-port port 1/45-48
In the VLAN Stacking mode, the port that you want to configure as a sender port should be a VLAN
Stacking port (network port). To create a sender port in an IPMVLAN configured in the VLAN Stacking
mode, use the
vlan ipmvlan sender-port
page 33-10
command by entering no vlan ipmvlan followed by the IPMVLAN ID, the
command.
command as shown below:
command as shown below:
OmniSwitch 6800/6850/9000 Network Configuration Guide
vlan ipmvlan address
vlan ipmvlan ctag
command as shown below:
vlan ipmvlan ctag
Configuring IP Multicast VLAN
command as
command by entering
March 2008

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 6850 seriesOmniswitch 9000 series

Table of Contents