Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual page 796

Displaying Server Load Balancing Status and Statistics
The show ip slb cluster server command provides detailed configuration information and statistics for
individual SLB servers. To use the show ip slb cluster server command, enter the command, the name of
the SLB cluster that the server belongs to, server, and the IP address of the server. For example, to display
statistics and parameters for a server with an IP address of 10.123.11.14 that belongs to an SLB cluster
called "Web_Server" you would enter:
-> show ip slb cluster Web_Server server 10.123.11.14
A screen similar to the following will be displayed:
Cluster Web_Server
VIP: 10.123.11.14
Server 10.123.11.4
MAC addr
Slot number
Port number
Admin status
Oper status
Availability time (%)
Ping failures
Last ping round trip time (milliseconds)= 20,
Probe status
In the example above, the server with an IP address of 10.123.11.4 is shown to be administratively enabled
and "in service" (i.e., this server is being used for SLB cluster client connections).
The show ip slb probes command provides both a global view of SLB probes and a detailed configura-
tion information and statistics for individual probes. For example, to view the status of all probes enter
show ip slb probes as shown below:
-> show ip slb probes
Probe Name
-----------------------+-------+-------+--------+------
web_server
mail_server
mis_servers
In the example above there are three probes configured on the switch.
To view detailed information on a single probe enter show ip slb probes followed by the probe name as
shown in the example below:
-> show ip slb probes phttp
Probe phttp
Type
Period (seconds)
Timeout (milliseconds)
Retries
Port
Username
Password
Expect
Status
URL
page 34-36
: 00:00:1f:40:53:6a,
= 1,
= 4,
: Enabled,
: In Service,
= 95,
= 0,
= ,
Period Retries Timeout Method
60000 3 12000
60000 3
3600000 5 24000
= HTTP,
= 60,
= 3000,
= 3,
= 0,
= ,
= ,
= ,
= 200,
= /,
OmniSwitch 6800/6850/9000 Network Configuration Guide
Configuring Server Load Balancing
HTTP
3000 SMTP
Ping
March 2008