Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual page 759

Configuring IP Multicast VLAN
4
Create a receiver port in the Enterprise mode of IPMVLAN by entering:
-> vlan ipmvlan 1003 receiver-port port 1/51-60
Alternatively, a receiver port can also be created in the VLAN Stacking mode by entering:
-> vlan svlan port 1/1 user-customer-port default-svlan 10
-> vlan ipmvlan 1002 receiver-port port 1/1
An example of what these commands look like when entered sequentially on the command line:
-> vlan ipmvlan 1003 name "multicast vlan"
-> vlan ipmvlan 1003 address 225.0.0.1
-> vlan ipmvlan 1003 sender-port port 1/50
-> vlan ipmvlan 1003 receiver-port port 1/51-60
As an option, you can use the
lan port-config, and
-> show vlan
vlan type
+----+-----+-----+-------+----------+------+----+-----+-----+---------+
1 std
2 ipmtv
3 ipmtv
4 vstk
-> show vlan ipmvlan 10 address
IpAddress
----------+---------------
224.1.1.1
224.1.1.2
224.1.1.3
ffae::1
ffae::2
ffae::3
-> show vlan ipmvlan 10 port-config
port type
+------+------------+
1/10 sender
1/20 receiver
1/30 receiver
1/49 receiver
+-------------------+
OmniSwitch 6800/6850/9000 Network Configuration Guide
show vlan ipmvlan
show vlan ipmvlan port-binding
stree
admin oper 1x1 flat
on on on on
on on off off
on on off off
on on on on
ipAddressType
Ipv4
Ipv4
Ipv4
Ipv6
Ipv6
Ipv6
c-tag, show vlan ipmvlan
commands to confirm your settings. For example:
mble
auth ip ipx
off NA off
off NA off
off NA off
off NA off
March 2008
IPMVLAN Application Example
address, show vlan ipmv-
tag name
off VLAN 1
off IPMVLAN 2
off IPMVLAN 3
off SVLAN 4
page 33-13