In This Chapter - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Hide thumbs Also See for OmniSwitch 6800 Series:

Table of Contents

39 Configuring Network

Network Security (also known as Alcatel-Lucent's Traffic Anomaly Detection feature) is a network

monitoring feature that aims to detect the anomalies in the network by analyzing the patterns of ingress

and egress packets on a port. These anomalies occur when the traffic patterns of a port do not meet the

expectations. The detection of anomalies results in logging, SNMP trap generation, and shutting down of

the anomalous port. This feature is mainly used in the Layer2 domain.

Note. The Network Security feature is supported only on OmniSwitch 6850 and 9000 Series switches in

Release 6.3.1.

In This Chapter

This chapter describes Network Security features and how to configure them through the Command Line

Interface (CLI). CLI commands are used in the configuration examples. For more details about the syntax

of commands, see the OmniSwitch CLI Reference Guide.

Configuration procedures described in this chapter include the following:

"Creating monitoring-group and associating port range" on page

"Disassociating port range from monitoring-group" on page

"Configuring anomaly to be monitored" on page 39-6

For information about CLI commands that can be used to view Network Security, see the OmniSwitch CLI

Reference Guide.

OmniSwitch 6800/6850/9000 Network Configuration Guide