Displaying Statistics For A Particular Rmon Probe; Sample Display For Ethernet Statistics Probe - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Remote Monitoring (RMON)

Displaying Statistics for a Particular RMON Probe

To view statistics for a particular current RMON probe, enter the
specifying an entry number for a particular probe, such as:
-> show rmon probes 4005
A display showing statistics for the specified RMON probe will appear, as shown in the following
sections.

Sample Display for Ethernet Statistics Probe

The display shown here identifies RMON Probe 4005's Owner description and interface location
(OmniSwitch Auto Probe on slot 4, port 5), Entry number (4005), probe Flavor (Ethernet statistics), and
Status (Active). Additionally, the display indicates the amount of time that has elapsed since the last
change in status (48 hours, 54 minutes), and the amount of memory allocated to the probe, measured in
bytes (275).
-> show rmon probes 4005
Probe's Owner: Switch Auto Probe on Slot 4, Port 5
Entry 4005
Flavor = Ethernet, Status = Active
Time = 48 hrs 54 mins,
System Resources (bytes) = 275
page 35-38 OmniSwitch 6800/6850/9000 Network Configuration Guide
Diagnosing Switch Problems
show rmon probes command,
March 2008