Condition And Action Combinations - Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual

Configuring QoS

Condition and Action Combinations

Conditions and actions are combined in policy rules. The CLI prevents you from configuring invalid
condition/action combinations that are never allowed; however, the following table provides a quick refer-
ence for determining which condition/action combinations are not valid. Each row represents a policy
condition or conditions combined with the policy action or actions in the same row.
Policy Condition/Action Combinations
Conditions
multicast IP address or network group
multicast IPv6 address
destination VLAN
destination slot/port or port group
For more information about policy conditions, see
information about policy actions, see
OmniSwitch 6800/6850/9000 Network Configuration Guide
Actions
all actions
all actions
all policy actions
all actions
"Condition Combinations" on page
"Action Combinations" on page
March 2008
Condition and Action Combinations
Supported When?
never, except with disposition action
never, except with disposition and
mirror actions
never, except with disposition action
in a multicast rule (a rule that uses
the "multicast" keyword and only
applies to IGMP traffic)
bridging only on OS6850/OS9000
30-6. For more
30-8.
page 30-9